Huaxing dry goods Sharing -- maintenance of dry mixed mortar equipment

In order to avoid excessive loss of mortar equipment in production, our technicians summarized several suggestions, so as to prolong the service time of the equipment and reduce the vulnerability of the machinery. Let's take a look~

1. It should be noted that the materials cannot be mixed with impurities with strong hardness, such as iron nails and stones. Otherwise, various quality problems will occur in the dry powder mortar produced by the equipment.

2. Long term non-stop operation will lead to uneven stress in the hopper of the mixer, which will cause serious wear of the lining plate of the equipment. At this time, the equipment should be stopped for a period of time, buffered and then put into production.

3. Ensure the uniformity of material strength. Different strengths will lead to uneven stress on the lining plate of the mixing bin, which will affect the normal operation of the mixer. Therefore, in order to ensure the working efficiency of the dry mixed mortar equipment and extend its service life, we should avoid this.

4. Ensure that the dry mixed mortar equipment is placed in a dry environment without any corrosion.

5. After the equipment is used, don't forget to clean the cylinder, and then reset the sensor to zero.

6. Looseness of fasteners: because of long-term use and operation, machine vibration may lead to looseness of fasteners, so we should check regularly and tighten them in time.

7. Regularly check all systems, such as mixing bin, propulsion cabin and discharge hopper, which should be cleaned every 4 hours to avoid concrete consolidation and hindering normal operation. If the equipment is found to have electric leakage, ash leakage and gas leakage, it shall be handled in time.

8. Before starting up the dry mixed mortar equipment, we should pay attention to whether there are residues and sundries at all inlets and outlets. If they are found, they should be fully cleaned before starting up.

9. Pay attention to daily lubrication and maintenance, and add oil at each oil filling point in time.

The above are the daily maintenance methods of dry mixed mortar equipment, which can prolong the service life of the equipment.

If there is any problem in the operation of the equipment, you can consult our technical personnel, and we will inform you of the solution in time. It is our responsibility to abide by the contract and honor the credit. We will also treat every customer sincerely to achieve win-win cooperation and create a better tomorrow!

contact us:

Tel: 0536-4395888

Company address: South of the east of Xinchuan street, Xin'an street, Anqiu City, Weifang City, Shandong Province